Meihua Power is a source manufacturer of Weichai, Yuchai, Cummins, and Shangchai, and provides a brief introduction on the fuel efficiency of diesel generator sets.
The fuel consumption varies depending on the usage environment. However, how to minimize the fuel consumption of the generator set in the same environment? Please 、take a look at the following content:

1. Increase the temperature of diesel engine cooling water
An increase in water temperature can lead to a more complete combustion of diesel, a decrease in oil viscosity, and a reduction in motion resistance, which can achieve fuel efficiency.
2. Maintain a better fuel supply angle
Check the oil angle position of the diesel generator. If the oil supply angle deviates, it will cause the oil supply time to be too late and the fuel consumption to increase. Therefore, a good oil angle position is crucial.
3. Ensure that the machine does not leak oil
The diesel engine oil delivery pipe of the generator set often experiences oil leakage due to uneven joint contact, gasket deformation, or damaged surfaces. The recommended method is to apply valve paint to the gasket and ground it flat on a glass plate, then adjust the oil pipe joint. Add a diesel recovery device, which can connect the return oil pipe on the nozzle with the hollow screw using a plastic pipe to allow the return oil to flow into the fuel tank.
4. Purify the oil before use
More than half of the faults in diesel engines come from the fuel supply system. The method of handling is to let the purchased diesel settle for 2-4 days before use, which can settle 98% of impurities. If you buy it now and use it now, you can place two layers of silk cloth or toilet paper at the fuel tank filler screen.
5. Change the "big horse pulling small car“
Properly increase the belt pulley of the diesel engine, increase the speed of the water pump while the diesel engine is running at a reduced speed, increase the flow rate and head, and achieve energy-saving goals.